9 Cross-breeding agreements Canadian Best Practices FACILITY POSITION Contains provisions relating to the position of the recipient institution versus the position of the recipient institution. CONDITIONS Specifies the conditions that apply to a particular intersection. STANDARD LANGUAGE FOR ENTERING the Schedule of Standards Crossing Agreements An Alliance pipeline is regulated by the government by the National Energy Board (NEB) in Canada. The National Energy Board Act and regulations, the National Energy Board`s Regulations, Authorization and Pipeline Damage Prevention Obligations require a crossing agreement for any person proposing to cause ground disturbance in the prescribed area that extends vertically 30 metres on either side of the pipeline; the construction of a plant on, along, along or under an oil pipeline; or through a pipe with a vehicle or mobile equipment. A crossing agreement can be obtained from the pipeline operator. 6 Grade Crossing Agreements Canadian Best Practices Grade Crossing Agreement Sections PART 1 – FRAMEWORK AGREEMENT Includes: – Agreement – Schedule B (Site Plan and Profile) – Schedule C (Specific Terms and Conditions) This document should be used to develop company-specific level crossing framework agreements. PART 2 – The terms of the agreement provide for the conditions of the crossing. 7 Crossing Agreements The Canadian best practices of the Agreement ARE: – Agreement – Facilities Crossing Agreement – Appendix A – Mutually Agreed Terms and Conditions (CAPP header) – Appendix B – Site Plan and Profile (Company Letterhead) – Appendix C – Specific Terms and Conditions (Company Header) MASTER CROSSING – Development of two agreements, one of which is to be executed by the Grantor and one grant; Full page 1 of Calendar A; Give each party a copy of the Crossing Framework Agreement and Timetable A. – Exchange Annexes B and C only if specific crossing authorisations are required between the two parties involved. Sections of the crossing agreement To receive an alliance crossing agreement, please send us an email. Allianz will respond to requests by appointment within 10 business days.

4 Grade Crossing Agreements Canadian Best Practices Crossing Agreements Date Back to the 1970s Alberta Initiative Requires „Written Authorization“ to Refer to Various Buried Utilities Based on Different Laws Crossing Agreements 17 Grade Crossing Agreements Canadian Best Practices Lack of Legal Requirements Difficulties When Something Goes Wrong, both sides are in trouble. 10 Grade Crossing Agreements Canadian Best Practices ADDITIONAL WORK All future work related to the first crossing by one of the Parties in the crossing area will be approved and the terms of the original agreement will apply. The installation of a facility other than the one listed in Appendix „B“ requires a separate agreement on the intersection of the facility Emergency work in the intersection area requires oral notification and must be followed by written notification. Crossing Agreement Appendix A Crossing Agreements help inform pipeline operators of upcoming intersections or excavations to prevent accidents. 7 Grade Crossing Agreements Canadian Best Practices The building blocks of the agreement are:  Agreement – Facility Crossing Agreement  Appendix A – Mutually Agreed Terms (CAPP Header)  Appendix B – Site Plan and Profile (Company Header)  Appendix C – Specific Terms and Conditions (Company Header) CROSSING FRAMEWORK AGREEMENT  Development of two Agreements, one of which is to be performed by the grantor and the other by the fellow; complete page 1 of Appendix A;  Provide each Party with a copy of the Framework Level Crossing Agreement and Annex A.  Exchange Annexes B and C only if specific crossing permits are required between the two parties concerned . Sections of the Crossing Agreement To receive a crossing agreement from Alliance, please email us. Alliance will respond to requests for border crossing agreements within 10 business days. 4 Grade Crossing Agreements Canadian Best Practices Grade Crossing Agreements Date Back to the 1970s Alberta Initiative Requires „Written Authorization“ to Cross Various Buried Utilities Based on Various Laws Crossing Agreements 6 Crossing Agreements Canadian Grade Crossing Agreements Articles PART 1 – FRAMEWORK AGREEMENT Includes:  Agreement  Annex B (Site Plan and Profile)  Annex C (Special Terms and Conditions) The document should be used to develop company-specific framework concepts that run through the agreements. PART 2 – GENERAL CONDITIONS The agreement provides for the conditions of the crossing. the Crossing Agreement is recognized. The unsigned agreement remains valuable as a huge technical assessment value as a tool for damage prevention, but also for the safety of personnel, the requirements are verified Passing Agreement Challenges for implementation in the United States.

9 Cross-Breeding Agreements Canadian Best Practices POSITION OF THE INSTITUTION Contains provisions relating to the position of the recipient institution in relation to the position of the granting institution. CONDITIONS Defines the conditions of a particular intersection. STANDARD LANGUAGE REMEDY Registration of the standard crossing agreement Annex A 10 Crossing agreements Canadian best practices ADDITIONAL WORK Any future work related to the first crossing by one of the parties in the crossing area will be approved and the terms of the original agreement will apply. The introduction of a facility that is not listed in Schedule „B“ requires a separate emergency services agreement in the transit area, which requires verbal notice and from which written notice must be followed. Crossing agreement Annex A The agreement granted contains information and instructions on how to safely cross a transmission platform or work within the scope of its right of priority. An Alliance representative will mark your area of work and monitor Jexier`s activities to ensure compliance with the agreed intersection agreement. 17 Grade Crossing Agreements Canadian Best Practices Lack of Legal Requirements Difficulties in Getting Parties to Apply for Drawings (little time or incentives to sign) If something goes wrong, both parties are in trouble HOWEVER, the crossing agreement is recognized. The unsigned agreement remains valuable as a technical assessment Extremely valuable as a loss prevention tool, but also for the safety of employees Requirements are under review Passage agreement Challenges to implement in the United States Pipeline crossing agreements help pipeline operators know about upcoming intersections or excavation work so they can avoid accidents. Unauthorized crossing or excavation work poses a serious threat to the safety of workers and pipelines, as well as to the safety of others in the vicinity. Alliance Pipeline is regulated by the Canadian government through the National Energy Board (NEB).

The National Energy Board Act and its National Energy Board pipeline damage prevention regulations, regulations, authorizations and obligations make a crossing agreement mandatory for anyone who proposes to cause ground disturbance in the prescribed area that extends 30 metres vertically on both sides from the centre line of the pipe; build a plant above, on, along or under a pipeline; or cross a pipeline with a vehicle or mobile equipment. A crossing agreement can be obtained from the pipeline operator. The crossing agreement granted contains information and instructions on how to safely cross a transmission line or operate within its right-of-way. An Alliance representative will mark your work area and monitor intrusive activities to ensure compliance with the agreed intersection agreement. 14 Crossing Agreements Canadian Best Practices Crossing Agreement Process 1 Requests by the Parties to Cross the Facility (by a single call or direct request to the Facility Owner) 2 The plant owner will locate and mark the utility within 48 to 72 hours 3 If the ground failure exceeds the right-of-way, this will trigger the crossing agreement process CARLIN LAW GROUP, APC Reasons for overtime and/or compensation A.Express modifies B.Design C.Different Site Conditions Suspension of D.Express. On September 14, the United States.C 103(c), as amended by the Cooperative Research and Technology Enhancement (CREATE) Act (Public Law), which came into effect in December. Let`s learn legal English together!. Modal verbs in legal English Should and May. 8 Crossing Agreements Interpretation of Canadian Best Practices Contains words, terms and definitions of the same CONSENT The Grantor agrees that the Recipient may perform the Recipient`s settlement work in the Transit Area in accordance with the terms of the Agreement. COMPLIANCE WITH LAWS AND REGULATIONS Compliance with all applicable codes, laws, laws, regulations, permits, licenses, orders and instructions of a government agency. Failure to comply with this Agency`s regulatory requirement can now result in fines of up to $100,000 per day per violation by the Agency`s Administrative Monetary Penalties Office. Tasks and responsibilities presented by the North Carolina Department of Crime And Public Safety, Emergency Management Division, and the Department of North Carolina.

2 Crossing Agreements Canadian Best Practices Ground Disturbance in Canada There is no Appeals Act, BUT Buried Utilities Must Be Located from Ground Disturbances (Various Acts) Buried Utilities Protected by the Crossing Agreement 15 Crossing Agreements Canadian Best Practices On-Site Crossing Agreement 1 Marking Review, Hazards, Emergency Response Protocol 2 Documentation Review and BackfillIng Requirements 3 Confirmation of Company Inspector Authority IMPORTANT READ CAREFULLY BEFORE USING THIS PRODUCT LICENSE AGREEMENT AND THE LIMITED WARRANTY BY INSTALLING OR USING THE SOFTWARE, FILES OR OTHER ELECTRONIC DEVICES. . . .

  Posted in: Allgemein  

Diese Seite verwendet Cookies, um die Nutzerfreundlichkeit zu verbessern. Mit der weiteren Verwendung stimmst du dem zu.

Datenschutzerklärung